The Problem With SHOP-VAC® & Traditional Methods
TRACTOR OWNERS LOVE IT!
Saved time, mess & money
⭐⭐⭐⭐⭐
"We used it today to pressurize a gearbox for a woods mower. Just the right amount of positive pressure… Not too much to harm anything. But enough to find any cracks or leaks. Did exactly as I wanted.”
- Robert R.
United States
This is a great product
⭐⭐⭐⭐⭐
“This is a great product, with amazing customer support! The versatility makes this a valuable tool in any shop or mobile service truck!”
- Dan
United States
Better than a SHOP-VAC
⭐⭐⭐⭐⭐
"I’ve used a SHOP-VAC before and it’s a two person job. Also you hope you have it clean enough that you don’t get any trash into your tractor. This dedicated VAC TRAC works much better and you can finish your filter change out on your tractor by yourself.”
- Tony A.
United States
Changing Your Hydraulic Filters with
VAC TRAC® in 3 Steps
STEP 1
Stick VAC TRAC® in the fill port. Turn on to activate the vacuum.
The VAC TRAC® fits any tractor with its included adapters.
STEP 2
Spin off the old filter
Next, spin off the old filter. Fluid is held by the vacuum.
STEP 3
Replace filter. Repeat as needed.
Notice how there is a maximum of one tablespoon of oil loss with this method.
VAC TRAC®: BUILT FOR TRACTOR OWNERS BY A TRACTOR OWNER
SAVE TIME.
SAVE MESS.
SAVE MONEY.
Turn Messy 1 Hour Filter Changes Into A 6 Minute Job
Never waste your precious time cleaning up messes and spills and risk losing up to $125 worth of hydraulic fluid every time.
Avoid Vacuum Damage To Your Tractor
Using a high-vacuum, high-volume SHOP-VAC to change filters can potentially damage gearbox seals and create dangerously flammable aerosols of hydraulic fluid. DON'T RISK IT!
Cheaper Than Hourly Technician Fee
Every time you go to a technician, you’re getting charged upwards of $200/hr for a hydraulic filter change. Buy VAC TRAC® one time and never pay the hourly fee again!
60 Second Hydraulic Filter Change
Watch as this tractor owner changes his hydraulic filter in 60 seconds while saving gallons of expensive hydraulic fluid.
Why do these satisfied tractor owners just ❤️ the VAC TRAC®?
30-Day Money-Back Guarantee
We're so sure you'll love the VAC TRAC®, we've got a 30-Day No-Questions-Asked Money Back Guarantee to ensure that you are 100% satisfied with the VAC TRAC®
Frequently Asked Questions
Yes, VAC TRAC® works on all makes and model tractors where the hydraulic reservoir opening has a direct fluid connection with the fill port.
VAC TRAC® is designed for hydraulic filters whereas SHOP-VAC is not.
VAC TRAC® units are calibrated with the SAFE and correct balance between flow volume and vacuum strength.
Unlike the SHOP-VAC, this precise balance between vacuum and flow is what allows the VAC TRAC® pump to hold the fluid inside without sucking into the gearbox the dirt dislodged as the old filters are unscrewed.
Use the VAC TRAC® in 3 easy steps:
-
Stick VAC TRAC® in the fill port, then turn it on to activate the vacuum.
-
Remove the filter while the fluid is being held by the VAC TRAC®.
-
Replace the filter. Repeat as needed.
Yes, we're so sure you'll love the VAC TRAC®, we've got a 30-Day No-Questions-Asked Money Back Guarantee to ensure that you are 100% satisfied with the VAC TRAC®.
If you have any issues please contact our customer service hotline at (512) 714-5000. We are available from M-F: 9AM-5PM CST.
Inside the physical package, you’ll get:
-
VAC TRAC® unit
-
Flexible extension tube for hard-to-reach areas
-
Multiple fill port adapters
-
Rechargeable lithium-ion battery
-
USB charging cable
The battery can be fully recharged via the included USB cable in about 2 hours.
With a full charge, the VAC TRAC® will operate for about 30 minutes.
It is about the size and weight of a standard flashlight, measuring 9.5" tall and 2.25" in diameter.
This means you can easily fit it inside your toolbox.
Yes, service technicians use VAC TRAC® to hold hydraulic fluid in place when adjusting pressure control shims and to hold crankcase oil inside when grabbing thief samples for warranty verification.
However, it should never be used on enclosures containing flammable vapors.